Welcome toShenzhen boda jingke biotechnology co. LTDOfficial website!
中文站 English
服务热线
Product Classification
Contact information

Shenzhen boda jingke biotechnology co. LTD
Contacts:Mr. Liu
Mobile phone:18922873228
Telephone:0755-82383658
address:5th floor,okwei building, 447 donghai avenue west, yantian district,shenzhen

Your present position: Home > News > > Digital display cons..
    Digital display constant temperature magnetic agitator should be shut down after heating
    Date of publication:2019-07-11

    Digital display constant temperature magnetic agitator should be shut down after heating

    For maintenance of digital display temperature magnetic stirrer, as operators should understand the necessary maintenance for equipment used in the late will bring a lot of help, on the contrary, if the lack of digital display temperature magnetic stirrer in the process of operation for maintenance, it will shorten the service life of equipment, late for equipment use may cause a certain hidden danger, the digital display temperature magnetic stirrer what do maintenance, small make up then simple introduce for everybody.

    1. Do not allow the thermostatic magnetic stirrer to work without heating liquid.

    2. Before the operation of constant temperature magnetic agitator with digital display, check whether it is grounded and ensure that the work can be carried out after completion.

    3. In order not to damage the instrument, insulation materials are usually placed inside the digital display constant temperature magnetic agitator. Therefore, we will find some white smoke or pungent smell when we use it again.

    4. There is an upper limit on the heating of the devices inside the digital display and constant temperature magnetic agitator. Therefore, it must be taken into consideration when heating.

    5. When the heat is done, be sure to turn off the heat and wait a few minutes for the heat to dissipate before turning off the stirring.

    6, to ensure the dry operating environment, because in a humid environment, the instrument is prone to leakage of electricity and other phenomena, which is why the instrument must be grounded, if the instrument is very wet must be blown dry with hot air.

    7. Be careful not to get scalded during the operation of constant temperature magnetic agitator, because the temperature is usually high.

    More information about digital display constant temperature magnetic agitator, welcome to continue to pay attention to our company!



Home page  |  About us  |  Product center  |  News centres  |  Technical articles  |  Honor  |  Contact us

address:5th floor,okwei building, 447 donghai avenue west, yantian district,shenzhenTelephone:0755-82383658

Copyright ©2019-2020 Shenzhen boda jingke biotechnology co. LTD All Rights Reserved Copyright

Technical support:速骏科技