Model of heating magnetic agitator

Magnetic agitator is heated by electromagnetic effect driving agitator and electromagnetic heat effect.

Function analysis of heating magnetic agitator:

1. Stirring function: drive the magnetic agitator through the * magnet located under the working disc. * magnet can penetrate the working disc surface, and the magnet is fixed directly on the rotating shaft of the motor. The actual rotating speed of the instrument depends on the actual load and voltage. The fluctuation of the voltage within the permissible range and the change of the viscosity of the treated medium will cause the fluctuation of the rotating speed. The speed of the motor can be adjusted according to the requirements of the experiment.

2. Heating function: generally, heating magnetic agitator is equipped with heating device on the chassis. In addition, corresponding devices will be set to monitor the heating.

Safety precautions for heating magnetic agitator:

1. Do not use heated magnetic stirrer for stirring explosive substances in dangerous environment or underwater operation.

2. Only trained personnel should be allowed to use the heated magnetic stirrer.

3. Avoid heating the power cord of magnetic agitator to touch the chassis.

4. Wear appropriate protective equipment according to the type of treatment medium.

5. The instrument should not be used to deal with explosive media indoors. The instrument should be placed on a table that is not flammable or fireproof.

6, pay attention to the magnetic field! Consider the influence of magnetic field on the surrounding environment, such as data storage and cardiac pacemaker.

7. When the magnetic agitator is heated, the dish surface temperature zui can reach several hundred degrees Celsius. Please be careful to burn when touching the shell and dish surface of the instrument.

8. When heated and cooled, a slight sound may be made as a result of the expansion of matter.