Shenzhen boda jingke biotechnology co. LTD
address：5th floor,okwei building, 447 donghai avenue west, yantian district,shenzhen
During the operation of the digital display constant temperature magnetic agitator, you must be careful not to get burned, because the temperature is usually high.
For maintenance of digital display temperature magnetic stirrer, as operators should understand the necessary maintenance for equipment used in the late will bring a lot of help, on the contrary, if the lack of digital display temperature magnetic stirrer in the process of operation for maintenance, it will shorten the service life of equipment, late for equipment use may cause a certain hidden danger, the digital display temperature magnetic stirrer what do maintenance, small make up then simple introduce for everybody.
1. Do not allow the thermostatic magnetic stirrer to work without heating liquid.
2. Before the operation of constant temperature magnetic agitator with digital display, check whether it is grounded and ensure that the work can be carried out after completion.
3. In order not to damage the instrument, insulation materials are usually placed inside the digital display constant temperature magnetic agitator. Therefore, we will find some white smoke or pungent smell when we use it again.
4. There is an upper limit on the heating of the devices inside the digital display and constant temperature magnetic agitator. Therefore, it must be taken into consideration when heating.
5. When the heat is done, be sure to turn off the heat and wait a few minutes for the heat to dissipate before turning off the stirring.
6, to ensure the dry operating environment, because in a humid environment, the instrument is prone to leakage of electricity and other phenomena, which is why the instrument must be grounded, if the instrument is very wet must be blown dry with hot air.
7. Be careful not to get scalded during the operation of constant temperature magnetic agitator, because the temperature is usually high.