How to deal with a sudden power failure in the use of ceramic heating plate

Ceramic heating plate is a kind of heater with high temperature and long life. In modern industry, the higher and higher working temperature requirements, ceramic heater can adapt to, especially chemical fiber, engineering plastics, plastic machinery, electronics, medicine, food and various pipeline heating, etc. Ceramic joint heater consists of spiral resistance wire through specially designed high temperature ceramic tile, precision extension, flexible, beautiful ceramic fiber metal shell insulation layer. Effective high temperature, high power density, band heater, flexible design for easy installation.

Ceramic heating plate has circle type and plate type specifications, reliable long service life, strong and durable, energy saving, easy installation, high temperature resistance, fast heat transfer, good insulation, production is not limited by the size of model and specifications and other advantages. According to the wiring mode required by users, the voltage ranges from 36V, 110V, 180V, 220V and 380V, and the zui high power load is 6.5w per square meter, which can reduce the energy consumption by 30% compared with the traditional electric heater.

In the process of using the ceramic heating plate, in order to ensure the use efficiency of the ceramic heating plate, the user should test it regularly, in which:

1. Clean the surface of ceramic heating plate and dust the studio, and keep the machine clean and sanitary.

2. Check regularly whether the fan is running normally and there is any abnormal sound. If there is any, immediately turn off the machine for inspection.

3, check regularly whether the vent is blocked, and regularly clean dust accumulation.

4, periodically check whether the temperature controller is accurate, if not, please adjust the temperature controller static compensation or sensor correction.

5. Check whether the heating pipe is damaged and the circuit is aging regularly.

6, sudden power failure, to turn off the power switch and heating switch, to prevent the automatic start when the call.