The heating plate should be placed away from combustible and combustible materials

The heating plate can be widely used in household appliances, such as rice cookers, microwave ovens, electronic disinfection cabinet, hair dryer, electric iron, etc., can also be used for all kinds of machinery and equipment for heating components, such as molding machine, copy machine, printer, fax machine, etc., in a variety of industrial and agricultural is also widely used heating situations, such as mould with hot, plastics machinery, and other heating and drying device. The heating plate is designed as flat and thin plate, with uniform heat dissipation, simple structure, easy to install and easy to use. The heating plate is made of stainless steel, ceramic and other materials as the outer shell. The electrothermal alloy wire is enclosed in the interior of the electric heating plate. Therefore, it is enclosed for heating.

The heating material of the heating plate is mainly electrothermal alloy wire. Its working principle is very simple. When the electric heating plate works, the electric current passes through the electrothermal alloy wire, which will generate heat, convert electric energy into heat energy, and conduct it to the outer shell. The heating plate is designed with insulation material to ensure that the current of the electrothermal alloy wire will not cause safety hazards to the user.

The heating plate can also be applied to biology, genetics, medicine and health care, environmental protection, biochemical laboratory, analysis room, education an essential tool for scientific research, its main characteristics: heater made of special molding process without buckling deformation, high temperature working face choose stainless steel, has a superior corrosion resistance, surface temperature rise quickly and evenly, the use of safe and reliable.

In the use of the heating plate, the user should operate in strict accordance with the relevant specifications, strictly prevent the occurrence of fire, to achieve:

1. It is strictly forbidden to place the electrified heating plate on or near combustible materials;

2, the heating plate should be correctly installed plug, do not put the wire directly into the socket, otherwise it will cause a short circuit fire;

3. The power supply of the device must be cut off when the user leaves;

4. Do not continue using the resistance wire after it has been repaired for more than three times, or it will cause the line overload and cause a fire.

5. The safe interception amount of heating tube wire must meet the capacity requirements of electric heating tube