Multi - point constant temperature magnetic agitator adopts high quality dc motor, low noise, stable speed regulation, fully enclosed heating plate can be used as auxiliary heating. Multi-point constant temperature magnetic agitator can set the temperature and display the temperature. It can be used for heating for a long time. Agitator made of ptfe and high quality magnetic steel, resistant to high temperature, wear resistance, chemical corrosion resistance and strong magnetism. It can be mixed in an airtight container, which is ideal and convenient to use. Multipoint temperature magnetic stirrer with single point and multi-point mixing function at the same time, simple operation, stable running, stepless speed regulation, digital display temperature control, can be in wide speed range to precision stability of stirring liquid solution, especially suitable for small volume of sample, oil, chemical industry, medicine and health care, environmental protection, biochemical laboratory, analysis room, education scientific research necessary tools.

The working principle of multi-point constant temperature magnetic agitator is that the micro-motor drives the high-temperature resistant strong magnet to rotate to generate a rotating magnetic field, which drives the agitator in the container to rotate, so as to achieve the purpose of stirring the liquid in the container. At the same time, the solution can be heated synchronously, so that the solution can be fully mixed and reacted at the set temperature. So it is widely used in biology, medicine, chemistry, chemical industry and other fields

Maintenance methods of multipoint constant temperature magnetic agitator are as follows:

1. * after use, smoke will appear in the inner core of the electric heating set and the grease on the outside of the glass filament will evaporate when heated. This does not happen if you electrify it several times.

2. The product shall be heated slowly after being exposed to moisture, and can be resumed after being dried.

3. Temperature setting: turn on the power switch, the digital display is bright, the upper row displays the actual measured temperature, and the lower row is the set temperature. Press "O", digital flashing, press" ▲" "beaches" key, set the temperature, after setting the temperature, then press "O", wait for a moment, the upper left corner of the sign is red light, start heating.

4. After the work is finished, first adjust the speed knob to set the small value of zui and turn off the power switch.

5. If it is not used for a long time, the plug should be removed from the socket.