HMS series digital display multipoint magnetic stirrer

HMS - 5 h HMS - 10 h

HMS to 15 h

Product description:

HMS series multipoint digital display type magnetic stirrer, respectively with 5 work work, 10 and 15, with heating and without heating function, appearance design is novel and attractive, easy to operate, stirring speed adjustable and quieted, instrument operation, heating temperature: room temperature to 200 ° C set arbitrary, highest can be heated to a temperature of 100 ° C samples

The heating module adopts nanometer thermal energy technology, with fast heating, large heating area and even heating. Suitable for large number of sample screening, culture, sample concentration, solvent evaporation and other experiments;

It is widely used in medical treatment, biology, petroleum, chemical industry, environmental protection and other fields. It is a good helper in the experiments of inspection and quarantine, health and epidemic prevention in universities, colleges and scientific research institutions.

Product features:

1. The heating module adopts nano thermal energy technology, no mechanical heating components, dry heating, no electromagnetic field interference and harm, large heating area, uniform heating, rapid heating;

2. Can heat and stir containers of various shapes and sizes of 1~500ml standard or non-standard;

3. Dc motor, stable performance, low noise, long service life, stable low speed, strong high speed;

4. The body is made of oxidized aluminum alloy, with novel and beautiful appearance design;

5. The working panel is made of germany-microcrystalline ceramics, resistant to acid, alkali and high temperature, easy to clean;

Technical parameters:

Model hph-05 / hph-05h hph-10 / hph-10h hph-15 / hph-15h

Electric voltage (VAC) 220 V / 110 V 220 V / 110 V 220 V / 110 V

The frequency is 50/60 Hz

Turn speed 0 RPM, 100 ~ 1100 RPM

Temperature range -- / plate temperature: Ambient ~200℃, sample temperature: Ambient ~120℃

The maximum stirring amount is 2.5l 5L 7.5l

The maximum capacity is 500ml

Standard stirring Φ child size 12 x 35 mm

Working board size 140×540mm 240×540mm 340×540mm

The working panel is made of microcrystalline ceramics

Stir in 5, 10, 15 bits

Stirring point spacing is 90mm

Maximum length of agitator ≤40mm

Maximum power -- / 300W -- / 600W -- / 800W

Motor input power 7.2w 14W 30W

Motor output power 1.8w 4W 6W

Ambient temperature 5℃~40℃

Ambient humidity < 90%

Weight: 4.2kg, 6.7kg, 7.2kg

External dimension 160×560×80mm 260×560×80mm 360×560×80mm

Multipoint magnetic agitator is a laboratory instrument for liquid mixing. It is mainly used for stirring or heating at the same time to stir liquid or solid-liquid mixtures with low viscosity. Its basic principle is to use the magnetic field of the same repel, opposites attract principle, using magnetic field to push the magnetic agitator placed in the container for circular movement, so as to achieve the purpose of stirring liquid. With the heating temperature control system, it can heat and control the sample temperature according to the specific experimental requirements, maintain the temperature conditions required by the experimental conditions, and ensure that the liquid mixture meets the experimental requirements

Analysis of the key points in the use of multipoint magnetic agitator:

1. If the agitator beats or does not stir, please cut off the power to check whether the bottom of the beaker is flat and the position is correct. Meanwhile, please measure it.

2, heating time is generally not too long, intermittent use to extend life, do not heat when stirring.

3. Medium speed operation can work for 8 hours continuously, high speed operation can work for 4 hours continuously, prevent violent vibration when working.

4. Power consumption: the power socket shall be three-hole safety socket, which must be properly grounded.

5. The instrument should be kept clean and dry. Solution should not be allowed to flow into the machine to avoid damage.